Saturday, April 24, 2010

Robotic Remains and May Day Hints

This robot was cool... Notice the "was."

Having 26" bike wheels, it could cruise at an easy 13.9mph -- people can run about 10mph. So, for May Day, this would have been a great robot, but for one problem; without a ton of software, it was nearly impossible to control at high speeds. Any slight turn at speeds over 5mph would send the robot whirling -- it would either flip over a few times along the axis of the wheel axles or would end up on its side.

I decided to try out full speed. I took off up the hill in front of our house and it far out-distanced Peter in a matter of seconds. When I came back down the hill, I lost control as the robot headed straight for us. I yelled "JUMP" just in time for the robot to cream the mailbox. SNAP! That cool 1/2" aluminum rod is now in pieces. It was pretty awesome.

Notice the snapped wheel axle and bent spoke:

The 1/2" thick board didn't like the impact:

All this is to say, no robot will be visiting your house this year. I could put my old robot back together but what's the point of delivering cookies with a robot only to have it escorted back to the car by everyone in the neighborhood? :-)

Now for a hint about our house: I'm only telling you this because we caught everyone last year -- I think someone came while we were gone, but I thought Dad caught them.)

The Oggs tried to disable the motion detectors last year, but the motion detectors are "tamper proof" meaning that any tampering sets them off. Yes, this includes cutting wires. (I'd appreciate it if you didn't destroy my stuff, BTW :-)

We won't try to catch you until you ring the doorbell or attempt cheat.

Several people have tried parking in front of our front door to make the running distance as short as possible, but I believe we've caught every single person who's tried that. Go the longer routes -- the way our house is setup, it's much more difficult for us to catch you that way. (And, yes, I'm serious .)

I can guarantee you we won't be soaking anyone, so there's really no danger in being caught. We do plan to have more props in the yard this year since the robot busted, so take some time to look around. (It's a lot of stuff to set up, so hopefully SOMEONE sees it all :-)

Thursday, April 22, 2010

Durango Done

Here's what the hotel looked like: (View from my hotel room porch)

See? It was pretty much right next to the train:
It was a very pleasant trip -- it's fun being able to walk to dinner, walk to Cold Stone Creamery, and walk to a movie -- I saw that new Alice in Wonderland movie... Still not sure what to think of it. :-)

If all my trips were like this, I'd love to travel!

Tuesday, April 20, 2010

Durango Bird

We drove up the road to go check out the lake the pumping plant here in Durango is creating... Well, swimming around were jet-black ducks, all sleek and shiny. Above their eyes a brilliant stripe of white seared their black bodies as light rays piercing the atmosphere in a summer sunset. Upon our arrival, these curious creatures suddenly dove. Since when to ducks dive? Since when do they completely disappear beneath the surface? Since when do they hold their breath for countless minutes? I recoiled in horror. Could these peculiar pests be plotting underwater to attack, kill, and eat humans? Could this be the beginnings of an Alfred Hitchcock movie?

(Just out of curiosity, does anyone know what these birds are?)

Monday, April 19, 2010

Durango

(with the "o" this time :-)

Here's where I'm working this week:
(Those are pumps. 2 are about 1MW, 2 are 2MW, and 4 are 5MW units. A home uses an average of 1KW. The large pumps use 5,000KW.)

Sunday, April 18, 2010

Durang

For the first time (probably) this year, I'm on a field trip... to Durango. The hotel is definitely one of the more interesting places I've stayed. (Sorry about the horrid picture, Q :-)

Thursday, April 15, 2010

Thing 2

Wednesday, April 14, 2010

May Day Robot Might be Coming

New axles, fresh off the lathe:




(If you're not impressed, this started as an aluminum rod. Notice the different diameters of the finished product? Also, notice the two different sizes of holes drilled in one end, and particularly, the square hole.)

Sunday, April 11, 2010

May Day is Coming!

Need I say more?